Fiat 500 Key Fob Replacement

If your 500 keyfob stops working, you can use a different one to see if it is able to be detected by the car. If it does, the problem is probably with the battery or water damage to the fob that was originally used.

Replace the battery first. Make sure the new coin battery is correctly inserted with the "+" side facing down on the fob.

Dead Battery

The battery is usually the reason behind the fob's inability to function. This isn't a problem to fix and most fobs will notify you that the battery is getting depleted. You can find the instructions on YouTube for nearly any key fob in your car or in the owner's manual. You can also change it by taking it to a locksmith or dealer who has sold it to you.

Sometimes, a fob will be inoperable and there could be a problem with the circuit board in the internal circuit. It's not a common occurrence but it is possible to occur. If you dropped the fob on something hard it may damage the internal chip. It can be a problem if you have an aftermarket fob and the key doesn't work. In this situation you'll have to visit an authorized locksmith or dealer and have it reprogRammed to work with your 500.

One 2012 FIAT fiat key 500 flip key remote – Looks like Ilco with lock, unlock and trunk buttons - new keyless entry replacement (will require cutting and program by a locksmith).

Chips damaged

A key fob with the fiat 500 key fob programming 500 number is an wireless device that sends an indication for the car to start when you press the button. It has a microchip containing information about the code needed to connect with your car. If the chip is damaged, it will not transmit the correct code and the car key cover fiat 500 will not start. Locksmiths can fix this type of damage. United Locksmith can complete this service on both classic and modern models, so do not hesitate to contact us.

Locksmiths can program the new key fob. This is much cheaper than going to a dealer and it works similarly. Locksmiths will require specific details from you, like the year your car was manufactured as well as the model's name.

If you're not sure how to program fiat 500 key fob to solve this issue Try scratching the chip with an US dollar bill. The copper in the bill is abrasive and will remove dirt and oxidation. However, it will not harm the microchip. If the chip is physically damaged however, it may not be able to be repaired. This can happen if you drop it, run it over with your vehicle or other form of physical trauma.

Water Damage

Whether you accidentally dropped your keys in the pool, left them in your pocket while you were swimming at the beach or splashed them with water on a rainy day, it's likely that your fob will suffer from water damage. Even if there's only the smallest amount of water on the key, it can cause serious problems with its electronic components.

The good news is that you can usually solve this issue by taking off the key fob and using paper towels to rid it of any remaining water or dirt. Once the fob is dry, you can replace its battery. It should then start working normally.

You can take it to an auto shop or locksmith to have it professionally cleaned and programmed. These professionals can use special equipment to make sure that the key fob is compatible with your car's computer.

If your Fiat 500's main fob ceases to work, it could be frustrating and stressful. It is tempting to go to the dealer have your key fob replaced however, this can be expensive and time-consuming. A locksmith can handle every aspect of the replacement of your car's key fob without the requirement of a dealership trip. Locksmiths are more reliable than a dealer since they can handle all aspects of your car's key fob replacement without the requirement for a dealership visit.

Pairing Issues

If you drop your keyfob, or it ceases to function and nothing else seems to be wrong, it may be the chip. This could be due to water damage or a dead battery. it could just be that you need to reprogramme it.

This can often be done by simply following the directions in your owner's manual. If you are having trouble or your manual doesn't work then you should hire an automotive locksmith complete this task. This will ensure that the chip isn't damaged, and it's the cheapest option.

Another issue that plagues some 500 owners is that the key fob will not secure the car. This can be a problem when you need to refill at gas stations. Some owners have even reported the locking mechanism on their 500's failing and needing to replace the entire steering intermediate shaft. This issue was reported in a technical service bulletin (TSB) by Fiat.

A reputable locksmith will assist you should your Fiat is experiencing problems. They're able to duplicate the key you have or make you a new one that will lock and open the car. They can do this without seeing your old key, and it's usually cheaper than buying a new one from the dealer.