how to get a spare subaru key to Programming a Subaru Key Fob at Home

The key fob to be programmed by an auto locksmith or a Subaru dealer, depending on the age of your Subaru is. This is typically accomplished by connecting a computer to the computer in the vehicle.

To program your Subaru begin by opening the driver's door with the door button control and then close it. You will hear a chime and see the dome lights flash on the instrument panel.

Step 1: Find the circuit board for your transmitter

There are a few different ways to program your key fob. It is first necessary to identify the type of key fob that you own. This can be done by examining the shape of the key fob or by listening for a sound in your car.

Once you have this information, you can begin the process of programming your key fob at home. To accomplish this, you'll require a key made of steel and a screwdriver with a flat head. Open the key fob by twisting. Insert the key made of metal into the case and release the battery by pushing the tabs holding it in place. Replace the battery and then put the case back together.

Step 2: Remove the key fob case

Change the battery is a good idea because it could revive key fobs which aren't working no longer. In some cases, the buttons on the key fob may be broken. If you notice the button's contacts made of metal have become loose Try reconnecting them to get them working again.

Before you start the process, ensure the doors of your vehicle are closed and your ignition is off. Close the driver's side door and press your button 10 times in rapid succession. Then, you should hear the instrument panel chime and the dome light will flash. This indicates that you're ready to proceed.

Step 3: Insert the Key Fob in the ignition

There are a lot of websites online that can give instructions on how much to replace a subaru key fob to program a new or replacement Subaru key fob at home, however most of them are not very specific. A professional auto dealer or locksmith in Fort Bliss is the best alternative for reprogramming a digital car key.

Sit in the driver's seat of your subaru keys with the engine off and all doors closed. Use the door button to unlock all of the doors. Close and open the driver's door three times. Then, insert and remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp to confirm that the settings have changed.

Step 4: Turn the ignition On

Before proceeding with this method of programming a key fob, it is important to note that this method works only in the event that you already have a functioning key already. If you don't, a dealership or auto-locksmith will need to program a key for your Subaru Fort Bliss.

Once your key is programmed, you should be able start your car in around five minutes. Start by closing all doors and turning off the engine. Sit in the driver's seat and open all doors using the button on the door. Put the key into the ignition and turn it to the first position. The electrical systems will be activated however, the engine remains in neutral. Repeat this process ten times.

Step 5 Step 5: Lock the Driver's Door

Subaru has a broad selection of luxury cars that come with key fobs that lock and unlock the doors, start the car, and defrost the windows. However, at times, these devices fail to function properly.

Find a locksmith or dealer to resolve the issue. This will fix the problem and make sure that your vehicle is secure.

To accomplish this, open the driver's door, then close it. Then, you need to place the key in the ignition and switch it to the initial position. Then, turn it back to the off position. Repeat this ten times a row as quickly as you can. After the tenth time, you will hear a sound.

Step 6 Step 6: Press the Lock/Unlock button on the driver's Door

The process to replace a battery in the Subaru remote key fob is very simple. First, you must open the exterior fob casing. Then, use the flathead screwdriver open the inside of the case and remove the old battery.

After taking the battery out and replacing it with the new one. Close the case. Then, get in the driver's seated position and unlock all the doors using the door button control. Finally, insert the ignition key and turn it to ensure that the electrical systems are powered on but the engine is off. Repeat this 10 times until you hear a chime on the instrument panel. This puts the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

For certain owners, the irritating chirp heard when locking and unlocking the Subaru key fob from outside the vehicle can become distracting. In some instances, you can disable the sound by shutting and opening all doors while double-clicking the lock button on the key fob.

Close all doors, including the lid for the fuel-filler, and switch off the ignition. For 10 seconds then press and hold the lock button on the key fob. The instrument panel emits a chime when this is achieved. The chime signals that the lid of the fuel-filler door are locked. The setting can also be altered to ensure that the doors and fuel-filler lid lock automatically without having to press a request switch.

Step 8: Enter your 8-digit Transmitter Number

Note down the first series of 8 numbers and keep it handy. Now, get in your driver's seat. Close all of the doors, and then turn the key to the first position (towards towards). After ten turns, your instrument panel should begin to sound once.

Then, you need to open the case for the key fob and find the circuit board of the transmitter inside. The circuit board should contain one or two numbers with 8 digits. Take note of the first sequence of numbers, and follow the instructions in this guide to register the code with the system of your vehicle. For older models, this process may require a visit the dealer.