Pellet Stove Furnace

pellet stoves small stoves can be used as a second heating source or, with proper venting, a primary heating option. They are available as freestanding models as well as fireplace inserts. They can give the appearance of an old-fashioned wood-burning fireplace.

The auger moves the pellets out of the hopper into the combustion chamber which is where they burn and generate heat. Sensors are able to monitor the flame and alter the speed of operation to maintain a desired temperature of the room.

1. Energy Efficiency

Pellet stoves burn a sustainable non-toxic fuel composed of compressed sawdust, bark, wood chips, and other materials that are normally placed in landfills but which can be repurposed into a sustainable and clean source of heating. They help homeowners reduce their energy use and consequently greenhouse gas emissions. Many owners of pellet stoves say they have recouped their initial investment in just several years with lower heating costs.

Pellets are highly compressed and more dense than natural wood, making them more efficient to burn. They also produce much less creosote than traditional wood-burning fireplaces. Additionally, they are packed in plastic bags to seal out moisture and need less frequent cleaning.

Pellet stoves, as with other heating systems, need to be sized and vented properly. A skilled technician can assess your space and venting requirements to ensure the most efficient results.

In the process of installation, the hearth is constructed to fit the space and the vent is fitted through a hole that has been cut in the siding of your home. The vent can then be placed on a side wall or through the roof, based on your preference and local regulations.

After the vent and hearth are completed the pellet stove can be connected. Certain manufacturers offer a remote control to make it simple to start and keep the fire going, while others provide additional sensors to monitor airflow and combustion flue temperatures, as well as pressure. If the system determines that it needs more or less pellets, it will signal the auger to accelerate or slow down according to the situation.

Each stove comes with a storage hopper that holds between 35 and 130 pounds of pellets until needed. Hopper capacities affect how often the stove will need to be filled and larger hoppers allow for longer periods between refills. A grille draws air out of the room, passes it over the heat exchanger and then blows heated air through the living space via convection. A auger, grate or any other device distributes the pellets and a pan beneath collects any unburned ones as well as the combustion remnants.

While pellet stoves are more efficient than wood-burning models they're not as efficient as natural gas furnaces or electric heaters. The electric components that drive their motorized components require a power source which could cause an issue during a power failure, but backup systems are readily available, such as generators and batteries.

2. Low Maintenance

pellet stove fireplace stoves can be extremely efficient, but they require some maintenance in order to function properly. Cleaning regularly your stove's exhaust vents and the stove will help prevent the accumulation of harmful creosote which could cause an explosion, fire or damage to your stove or house.

A pellet stove burns compressed natural wood pellets or other materials (like nutshells, corn kernels or small pieces of wood scraps). An electric-powered auger feeds the pellets from a fuel tank into the burner, and into the combustion chamber. The thermostat you set regulates the rate of pellets being fed to the burner. This allows the fire to remain roaring, or to lower the rate and even stop depending on your set temperature. When the fire is out the ash is then thrown into an empty ash tin beneath the burner. It can then be easily removed and disposed.

Pellets are produced from the byproducts of lumber processing that would otherwise be thrown away. They are a renewable source and produce less dust than traditional wood-burning appliances, making pellet stoves a cleaner heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals released by pellet stoves is significantly lower than that of modern wood stoves that have been certified by the EPA.

They are not required to be vented via chimneys, as is the case with traditional wood stoves. Instead, they must be vented correctly via a wall, or another exterior structure. Pellet stoves have flue ports that are located on the rear or top of the appliance. They are connected to a ventpipe which extends out the house.

A pellet stove has one drawback: you have to purchase or store enough fuel pellets to last the whole winter season. Pellet stove owners typically consume three tons of wood pellets each winter, at a cost of $200 per ton. These costs increase over time however, it's less expensive than buying and hauling firewood to traditional fireplaces or stove. Make sure that you purchase enough pellets so that your stove will last throughout the coldest winter months and that you have the right space to store them (preferably cool, dry and away from the ground).

3. Reduce carbon footprint

Pellet stoves generate heat using renewable biomass fuel, reducing the dependence on fossil fuels that are finite. This contributes to a reduced carbon footprint and helps diversify energy sources in homes.

Even the newest woodstoves that are EPA certified emit significantly less carbon dioxide than pellet stoves. Emissions from pellet stoves are also considerably lower than those from gas furnaces. Pellets can be made of sawdust and bark as well as other lumber remnants. They can also include corn, soybeans or agricultural waste. When they are burned, they release less particulates (leading to respiratory issues and allergies) as well as carcinogens, carbon monoxide, and the nitrous oxides.

The feed system is the primary difference between a pellet stove and a wood stove. Pellet stoves have hoppers that hold the pellets. When the thermostat or sensors indicate that the room is in need of heating, the auger is turned and the pellets are fed into the combustion chamber where they burn and generate heat. The air from the combustion chamber flows through a heat exchanger that transfers the heat to a blower and out into the room. This process creates very low emissions, and creosote does not created.

When the hopper is empty, a cyclone removes the ash and deposits it in an ash pot. The stove also contains fans to circulate the clean, heated air into the living room. The majority of pellet stoves require little maintenance and come with a huge viewing space for you and your family members to relax and enjoy the flames.

The most significant aspect that affects emissions from stoves made of pellets is the quality of the pellets. Pellets that are not of the highest quality will cause more emissions. When choosing your pellets, ensure they are certified as meeting certain standards and don't contain other ingredients like urea or petroleum-based products. Choose a company with a warranty and will repair or replace parts in the event of a problem. If you're looking for an environmentally friendly approach, some states permit homeowners to claim a tax credit for installing pellet stoves. This is a great way to offset the initial costs of this type stove and make installation more affordable.

4. Reduced Noise

Pellet stoves generate very little smoke and emissions when compared to wood-burning fireplaces. They also utilize an electric fan to distribute the heat more evenly across the space. This is the reason pellet stoves need less maintenance than wood stoves. While wood stoves require regular cleaning of particulates and chemicals to prevent deterioration, pellet stoves can be cleaned with the use of a vacuum cleaner made of metal.

Many manufacturers have made an effort to design their stoves to be simple to set up and to operate as well as maintain. Their appliances come in various styles that are designed to match the design of your home. Some models come with an app for WIFI, a programmable thermostat and remote control.

Most pellet stoves come with an enormous fuel hopper that can hold anywhere from 35 to 130 pounds of pellets. The pellets are then delivered to the combustion chamber by an auger. The speed at which pellets are fed to the burner determines how hot the fire is as well as the amount of heat it produces. The hopper can either be filled with hardwood pellets, composed of dense wood species such as oak and hickory, or softwood pellets. Many stoves can even make use of alternative biomass pellets such as those made from switchgrass or corn which are an environmentally friendly option.

Because best rated pellet stoves stoves use a clean fuel, they generate less smoke than traditional wood-burning fireplaces and require less maintenance. They also don't require chimneys, making them a more appropriate choice for new construction or retrofits.

Pellet stoves don't require regular cleaning of creosote or other chemicals like wood stoves. They only need periodic inspections to ensure their proper operation and maintenance. Based on the model, this might include regular inspections and cleaning of the accumulated the ash or "clinker," as well as the fan and motor. The dealer of your appliance can explain the proper procedures for the specific model and brand. He can also help you find the correct fuel for your stove and provide information regarding storage and safety.