Cat flaps allow your pet to come and go as they please, without you needing to let him in or out. They also prevent your cat from urinating in the home.

It is simpler to install the cat flap on a Upvc panel than a glass one however, you'll require some knowledge and right tools.

Take a measurement of the door

Installing a Cat flap in upvc door panel flap on the door isn't easy but as long as you select the right kind of cat flap in upvc door cost flap, take your time and follow the instructions provided it should not prove to be too much trouble. We will show how to trace the shape, then use an jigsaw for cutting out the area in the door and then finish the job by fixing the cat flap to the back door with cat flap fitted. This will ensure the flap remains in place and also protects the doors from damage caused by wind and rain.

To determine the size of the cat flap that you require, take a measurement of the width of your pet. This will ensure that the flap is large enough that your pet can enter and leave the house without needing to open and close the door every time, yet small enough to prevent them from going too far in either direction.

Once you have the measurements you can determine the location on the door where the template should be positioned, typically this is done using an X. However, some kits include a drawing that shows where to drill. If yours does then stick it to the door and draw a line around it. If your door has a sill or moulding on the bottom of it then make sure you have enough space as this will keep your cat safe and will prevent them from getting access to your home.

Next put on your eye protection and a dust mask. Then using a jigsaw begin to cut along the line you penciled in, don't try to push the blade too hard, as this could make it cut faster than you would like it to. Set the square with a ruler to ensure you are cutting the material correctly and that the hole is a rectangle. Once you are satisfied with the result, you can take the door material off.

Draw a Line

The cat flap is a great method to allow your pet to go out and in without worrying about them being a nuisance to guests or leaving unwanted gifts inside the home. It also stops draughts and helps to keep your home's temperature stable. Installing a cat flap on your door may seem daunting to those who haven't tried it before. Many people call an expert carpenter or joiner to complete the work. This is a viable option, however you can do it yourself if your tools are appropriate and the instructions are adhered to.

Although this is much simpler when using a timber door it is still possible to do this in uPVC doors, though you need to be very cautious not to damage the doors as this will end the warranty. The first step in the process is to measure the door and ensure that it will accommodate the new cat flap. If you have an ordinary uPVC panel it's easy. However when your door is composite or another type of door, you may require more care.

Next, you will need to determine the height of your belly for your cat flap fitting near me. This is the height from the floor to the bottom of the cat's stomach and you will need to find a place near the door where this measurement is within the range your cat is able to comfortably walk through. Once you've figured out the measurements you'll be required to mark the space with a spirit level and a pencil, so that you are certain that the opening will fit your cat.

Once you've marked the area, you're now ready to cut the hole. It is essential to take your time and use a jigsaw to ensure the cuts are smooth and clean, not rough and uneven. This could cause damage to your door. Be sure to wear safety glasses and a dust mask at all times when working with the jigsaw as breathing in the dust could be hazardous to your health. Once you've finished cutting the hole, you'll require sandpaper for smoothing the edges so that the cat flap is easily inserted into the hole.

Cut a Hole

Installing a cat flap to an existing door panel or double glazing sealed unit can be quite difficult. You might be tempted to tackle the task yourself, but unless you have plenty of expertise in DIY, it's recommended to hire a professional in to do the job for you. A faulty job can not only be unsightly, but also pose security risks. It could allow cold air in when the cat is outside and hot air to escape when it is inside.

The first thing you have to do is mark the position of the hole in the door using a pencil and an ax level. This will ensure that it is correctly located and is in a straight line with the other components of the door. It is important to have a piece of sandpaper at hand to smooth any edges.

Wear any safety equipment you need to work with a power tool. If you are concerned about the noise of the jigsaw, you can purchase an electric version that is much quieter and easier to use.

It is best to only remove the material that is required to fit the flap. It is essential to leave a little extra material to make the wall thickness of the cat flap. However cutting away too much could cause issues or even damage the door frame.

If the upvc door has a metal panel or frame, it may interfere with the microchip flap. In this scenario, you will need to create an over-sized hole to ensure that the metal doesn't touch the walls of the flap.

If you are fitting the cat flap onto a upvc door or double glazed windows with a frame made of metal, you'll need to speak to a professional who can supply you with a new glass pane with the hole for the cat flap inside. It is much less expensive to have this done instead of trying to install a cat flap into an existing glass pane that has not been manufactured specifically for this purpose.

Install the Flap

Cat flaps let your pet move around as they please, giving them the freedom to relax inside the house whenever they want to. If you've got a upvc door panels cat flap door it can be difficult to fit an animal flap, especially if you don't own glass panes that can be cut for one. If you're willing to purchase and install a half-glazed replacement uPVC panel then it is possible to add a cat flap to these doors. It's not just a matter of slicing holes in the door. It is also necessary to perform a few steps to ensure that the door is secure.

A composite, uPVC, or GRP door panel usually has an extremely thin plastic outer skin joined to a soft polystyrene core that is insulating. It is important to be careful when cutting the material. This kind of door comes with a template that you can use to make the hole.

After you have carved out the opening in your front door, it's time to install the cat flap. You can purchase and install a wide variety of different models, from basic push-button operated models to microchip activated units that allow only your pet. But, regardless of the type of cat flap in upvc door cost flap you select, it's crucial to ensure that your cat is able to use the flap without getting trapped in the weather.

It's a good idea to select circular fittings instead of one that is square, since circles can be more securely cut into door glass. It's because square holes are more likely to crack the glass when they are drilled. This is also a safer choice since you don't have to drill into the toughened glass which could break and cause harm to your pet or family. This is particularly important if you have child or an elderly person living at home who could be hurt by shards of glass.