How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of unique steps to add an additional ignition key. It requires dealer service using a handheld computer called Tech-2. Then a new car key and transponder need to be bought and then programmed into the car.

It is a good idea to rotate your keys in order that one doesn't get worn out more quickly than the other. This will also ensure that your keys remain in top condition.

Replacement Case

The new key fobs for keys are not like the older Saab keys. They have electronics that make them difficult to duplicate. This has made stealing car keys considerably more difficult than it was years ago. It has also made it more expensive to replace lost keys.

Saab 9-3 owners should have two keys working. If one is lost, it costs a lot of money to get another one for the vehicle because it requires replacing the CIM module and reprogramming the locking cylinders. Dealers usually charge between $100-$200 to complete this.

There are ways to reduce these high costs. Some parts dealers will look up the code from an old key (usually the same one that opens the doors and turns on the ignition) and cut a new metal key blade at only a fraction of the dealer's cost. The key must be the exact same as the original for it to work in your vehicle.

You can also change the case yourself by following these steps. You will need a flathead screwdriver along with some patience. Utilizing the screwdriver, slowly pull the plastic apart and remove the emergency key from the case. Once the case is opened, take out the electronics and place them into the new case. Make sure to insert the correct key and badge back in the case too.

replacement saab car keys Battery

The Saab Spare Key 9-3 replacement key for saab 93 battery is a cheap part that can be easily and quickly replaced. This DIY video from YouTube user Cyclone Cyd explains how to replace the battery of the remote key fob in just four steps. This tutorial is suitable for any modern saab key fob, although the process might differ slightly.

This button is usually placed next to the Saab logo on the back of the fob. The button is usually found on the back of the fob next to the Saab Logo. Next you will need a flathead screwdriver into the tiny hole in this button. This will be enough to allow you to open the fob's case to allow you to replace the battery.

After the new battery CR1632 is installed then you can reassemble your remote key fob. You can then program it to your car. The entire process should take no more than an hour, if not less. It's a simple process that does not require any special equipment.

If you lose a key, the process is slightly more complicated however it can be accomplished. The dealer needs to first determine the VIN of the vehicle and order the replacement TWICE module as well as key blade that is matched to the unique code. After that, they'll have to cut the replacement key and then program it with a brand new tool for programming called MDI.

Replacement Key Fob

The key fob is equipped with a battery that is used to lock and unlock your vehicle. Batteries are able to last for a short time and eventually die. This is a problem that occurs with all cars. The good thing is that you can replace the battery in most key fobs, without having to replace the entire case. Amazon sells fobs for replacement that already have all the electronics installed. It is easy to remove the case and replace the batteries. It is important to note that you'll need remove the emergency key first. you can do this by putting an incredibly small screwdriver with a flat head into the slot found in the middle of the case. The screwdriver should be moved around the case, and it will split open, making it simple to take it out.

If you're looking to replace your keys, make sure you have a spare in your possession. This will save you lots of money. If you have spare keys, you can ask the dealer cut an additional key and program it to your car, which is much cheaper than replacing the whole key fob.

It is possible to add another key to your vehicle if you don't already have one, however it requires a great deal of research and effort. It can cost a few hundred dollars to get a second car key. The computer in the car also needs to be programmed. This can be done by a professional, however it is an expensive option for most owners.

Replacement Ignition

The new SAAB 9-3 uses a more sophisticated alarm system built on a keycode. If you lose only one key, it can be costly to replace it with another one since the car needs to be equipped with a specific computer and be programmed to accept a brand new key. Dealers can charge hundreds of dollars to program a new key in the event that they are unable to do it.

If you've lost your only working key, a dealer will repair your car's computer (known as the CIM or saab fob key replacement TWICE) to make a replacement, and will charge you a premium price for it. We can reprogramme the existing EEPROM in your car computer so that it's ready to accept an additional key. This will save you more than 50% off the cost you have to pay the dealer.

If you've owned a car like the SAAB 9-3 for a long time and you're aware of the ignition keys aren't very durable. If the ignition key you have isn't functioning properly, you must think about replacing it. They can become extremely sticky and the buttons can fall off. Fortunately, replacing the ignition key isn't as complicated as it seems and can be done in a short time with the appropriate tools.